-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
Transline Technology is Bullish on Design Engineers
September 16, 2016 | Barry Matties, I-Connect007Estimated reading time: 6 minutes
At the International Microwave Symposium, I met with Chris Savalia, vice president and co-owner of Transline Technology. We discussed the California-based fabricator’s philosophy, the challenges of the RF and microwave markets, and the need to engage with young design engineers now.
Barry Matties: Chris, tell me a little bit about Transline and what the company does.
Chris Savalia: Transline Technology is a manufacturer of RF and microwave circuit boards. We also manufacture flex, rigid-flex, and we do metal etching and photochemical etching. Approximately 60–70% of our work is RF and microwave.
The company was started in 1982, so we've been in the business for about 25 years, and in '96 we moved to Anaheim into a 20,000 square-foot facility, where we have all processes in-house. The metal etching part of our business we acquired from another company about five years ago, and so that falls under the same umbrella.
Matties: What is your position at Transline?
Savalia: I'm vice president and co-owner of the Transline Technology, and my partner’s name is Larry Padmani.
Matties: What's your background?
Savalia: I got my degree in chemical engineering in India and then I continued in computer science here in the USA, so I have both a computer science and chemical background.
Matties: The FR-4 and flex market is a very large market and a challenging one too I think.
Savalia: It is challenging, but that's why in the late '90s we changed our focus to RF and microwave as well as flex and rigid-flex. There is less competition in this space. Mostly we use Rogers, Taconic and other PTFE material—specialized, high-speed laminates. The industries we serve are RF/microwave, wireless telecom, antennas, satellites, medical and many more. We also work with primes and sub-primes.
Matties: What kinds of people do you usually see here at the IMS show? Are they typically system-level designers or OEMs?
Savalia: We've been attending this show for about seven years, and this is the most important show for us every year. We connect with a lot of OEMs and design engineers here. They come by and we discuss what hurdles they are facing and how we can help. This show also has a lot of university students who are studying RF and microwave engineering in U.S. cities and all over the world. We enjoy interacting with them, because they will drive the technology forward and they will be our future customers.
Matties: Is the design engineer you’re talking to typically a circuit board designer or a system-level designer?
Savalia: Both. Most people here talk mainly about the RF and microwave boards. Depending on what kind of material they want or need to use—we work closely with material suppliers like Rogers and Taconic to help get their product built. If they need any information, we work together.
Matties: Do you offer design services as well?
Savalia: No. We don't have that at our facility, but we work with a selected few designers and outsource that service.
Matties: Now on the rigid side, do you offer metal backboards?
Savalia: Yes, metal backboards and also metal etching—aluminum, stainless steel, brass…many more.
Matties: How is that marketplace?
Savalia: That market is very good since most RF and microwave boards require shielding or metal back-boards, and so it's a part of that package.
Matties: From a buyer's perspective, is it difficult to find a supplier capable of doing this, or is this something that's becoming more commonplace?
Savalia: It’s becoming more and more commonplace, but we’ve offered it for a long time. It’s not for amateurs! We make it easier for the buyers to go to just one place.
Matties: Are you only doing low volume, or do you do any high volume?
Savalia: Right now we do mostly low to medium volume, lots of prototypes, but we only work one shift currently; however, we do have the capacity, equipment, and everything we need to start a second shift and do higher volume when the opportunity presents itself.
Matties: How do you do your sales, direct or through reps?
Savalia: We have sales reps all around the USA, on the East Coast, Florida, the Midwest, California, as well as two inside salespeople, and a customer service person.
Matties: As a circuit board fabricator, what's the most challenging thing you face?
Savalia: It's the competition, and since it's a specialized circuit board there's material lead time and special processing. To help our customers we stock almost all Rogers’, Taconic's, Isola’s and other material.
Matties: Aside from materials, what are the other challenges that you might face?
Savalia: I'd say it’s mostly processing and the competition.
Matties: When you say "competition," in what regard?
Savalia: Definitely the price. Especially in Southern California, where there are many circuit board fabricators.
Matties: Do buyers come in and really beat you up on price?
Savalia: Some of them, yes.
Matties: Do they understand that if they erode the supply chain from a financial point of view that the service for them goes down?
Savalia: Some of the customers leave because of the price, but many times they come back because of the quality and service.
Matties: Because I would think that if you're in the high-end marketplace and you’re doing this kind of work, especially if it's in a military situation, that price won't be a big issue and they would be more interested in capability and qualifications.
Savalia: Yes. We work with the Navy and defense; they do appreciate specialty boards.
Matties: In the 25 years that you've been around, what's the greatest surprise that's come your way?
Savalia: The greatest surprise is overseas competition.
Matties: That almost took us by surprise, didn't it?
Savalia: Yeah. It started back in the early '90s.
Page 1 of 2
Suggested Items
Warm Windows and Streamlined Skin Patches – IDTechEx Explores Flexible and Printed Electronics
04/26/2024 | IDTechExFlexible and printed electronics can be integrated into cars and homes to create modern aesthetics that are beneficial and easy to use. From luminous car controls to food labels that communicate the quality of food, the uses of this technology are endless and can upgrade many areas of everyday life.
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Koh Young Showcases Award-winning Inspection Solutions at SMTconnect with SmartRep in Hall 4A.225
04/25/2024 | Koh Young TechnologyKoh Young Technology, the industry leader in True 3D measurement-based inspection solutions, will showcase an array of award-winning inspection and measurement solutions at SMTconnect alongside its sales partner, SmartRep, in booth 4A.225 at NürnbergMesse from June 11-13, 2023. The following offers a glimpse into what Koh Young will present at the tradeshow:
Real Time with… IPC APEX EXPO 2024: Plasmatreat: Innovative Surface Preparation Solutions
04/25/2024 | Real Time with...IPC APEX EXPOIn this interview, Editor Nolan Johnson speaks with Hardev Grewal, CEO and president of Plasmatreat, a developer of atmospheric plasma solutions. Plasmatreat uses clean compressed air and electricity to create plasma, offering environmentally friendly methods for surface preparation. Their technology measures plasma density for process optimization and can remove organic micro-contamination. Nolan and Hardev also discuss REDOX-Tool, a new technology for removing metal oxides.
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).