-
- News
- Books
Featured Books
- design007 Magazine
Latest Issues
Current IssueLevel Up Your Design Skills
This month, our contributors discuss the PCB design classes available at IPC APEX EXPO 2024. As they explain, these courses cover everything from the basics of design through avoiding over-constraining high-speed boards, and so much more!
Opportunities and Challenges
In this issue, our expert contributors discuss the many opportunities and challenges in the PCB design community, and what can be done to grow the numbers of PCB designers—and design instructors.
Embedded Design Techniques
Our expert contributors provide the knowledge this month that designers need to be aware of to make intelligent, educated decisions about embedded design. Many design and manufacturing hurdles can trip up designers who are new to this technology.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - design007 Magazine
In Deep: The Art and Science of DFM with Gary Ferrari
February 8, 2017 | Andy Shaughnessy, PCBDesign007Estimated reading time: 2 minutes
When the topic of DFM techniques came up, I knew I had to talk with Gary Ferrari of FTG Corp. Gary has been involved with designing and manufacturing PCBs for decades, and he’s the past co-founder and executive director of the IPC Designers Council. I caught up with Gary between Thanksgiving and Christmas, and we conducted the following interview.
Andy Shaughnessy: Give us a quick background on yourself and your role at FTG.
Gary Ferrari: I have been in this industry for more than 50 years. The major portion of this time has been spent in PCB design and manufacturing. I have spent some time in assembly, industrial robotics, and nuclear and fossil power plant controls systems design.
I serve as the Director – Technical Support for FTG Circuits. My main function has many facets. First is to work with our customer base during the design phase of their products. I help them design for manufacture, which includes fabrication, assembly, repair, reliability, and field service. This includes end-product performance, both electrically and mechanically. It sounds like a lot, and it is. To meet today’s advanced products within short design cycles, one must consider all these areas when selecting materials, components, etc.
Second is to represent them within the standards develop committees of IPC. Many current-day issues are discussed during the development meetings, which affect both our company and our industry. There are so many new, advanced technologies cropping up constantly. One must stay on top of them if one expects to survive in this industry.
I also provide IPC designer certification through EPTAC, an IPC licensed training center. These courses are quite extensive, exposing the attendees to many of the issues affecting successful designs.
Shaughnessy: So, what can PCB designers do to make the fabrication process go smoother?
Ferrari: The most important item that a designer can do is to talk to their fabrication and assembly suppliers. Ask them about how your design practices are affecting their ability to manufacture with low yields and high reliability. Most important is to find out the areas that are the most troublesome. The designer has many ways to attack a given issue, and may be able to select a design solution that is easier to manufacture, resulting in higher reliability and lower cost. This is most important when doing a new design utilizing a technology that is new to the company. Most fabricators can draw from experiences gained through a wide variety of technologies they have worked with through a large customer base.
To read this entire article, which appeared in the January 2017 issue of The PCB Design Magazine, click here.
Suggested Items
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
05/03/2024 | Nolan Johnson, I-Connect007This week’s most important news is strategic—and telling. When one puts together the IPC industry reports, we simply have to include the recent conversation with Shawn DuBravac and Tom Kastner. On the design side, check out the latest “On The Line With…” podcast featuring Brad Griffin from Cadence Design Systems, discussing SI and PI in the realm of intelligent system design.
Synopsys, Samsung Electronics Collaborate to Achieve First Production Tapeout of Flagship Mobile CPU
05/03/2024 | PRNewswireSynopsys, Inc. announced that Samsung Electronics has achieved successful production tapeout for its high-performance mobile SoC design, including flagship CPUs and GPUs, with 300MHz higher performance using Synopsys.ai™ full stack AI-driven EDA suite and a broad portfolio of Synopsys IP on Samsung Foundry's latest Gate-All-Around (GAA) process technologies.
Altair Acquires Research in Flight, Forging a New Path for Aerodynamic Analysis
05/03/2024 | AltairAltair a global leader in computational intelligence, announced it has acquired Research in Flight, maker of FlightStream®, which provides computational fluid dynamics (CFD) software with a large footprint in the aerospace and defense sector and a growing presence in marine, energy, turbomachinery, and automotive applications.
Real Time with… IPC APEX EXPO 2024: Software Solutions for Circuit Board Challenges
05/03/2024 | Real Time with...IPC APEX EXPONolan Johnson speaks with Will Webb from Aster Technologies about their software solutions for design teams, manufacturing, test engineers, and process engineers. Aster's software addresses the increasing complexities of circuit boards and the need for alternative testing methods.
Real Time with… IPC APEX EXPO 2024: My Role as a Technology Solutions Director
05/02/2024 | Real Time with...IPC APEX EXPOPeter Tranitz, senior director of technology solutions at IPC, shares insights into his role as the design initiative lead. He details his advocacy work, industry support, and the responsibilities of the design initiative committee. The conversation also covers the revamping of standards, the IPC Design Competition, and the implementation of design rules in software tools.